Trusted Gate Repair for Houston Homeowners
Gate repair in Houston typically costs $180-$650 depending on the problem, and most jobs are completed in a single visit. Ironworks Gate Co. has been fixing driveway and estate gates across Houston since 1984, and we answer the phone live 24 hours a day, 7 days a week at (888) 799-8389.
A sagging gate in The Heights, a rusted post in River Oaks, a motor that quit during a summer storm in Memorial - we’ve seen it all in 42 years of working on Houston homes. Our technicians carry welding equipment, replacement hinges, and OEM parts for nine major automation brands, so we don’t make two trips when one will do. Every repair is backed by our written 90-Day Done Right Promise. If it’s not right, we come back and make it right. No paperwork, no arguing.
We don’t send a handyman who might figure it out. We send a trained gate specialist who will.
What Our Gate Repair Service Includes
Hinge Repair
Hinges bear the full weight of a gate every time it swings, and Houston’s humidity accelerates corrosion that weakens pins and brackets. A failing hinge starts as a groan, progresses to a sag, and ends with a gate that drags or jams completely. We remove the damaged hinge, inspect the mounting surface for rot or cracking, and install a properly rated replacement with grade-8 hardware. In Montrose and Gate Repair in Bellaire, we regularly see original builder-grade hinges that were never meant to last twenty years.
Post Repair
The post is the skeleton of your gate system. When it leans, shifts, or rots at the base, the entire structure loses alignment. Houston’s clay soils expand and contract with moisture, pushing posts out of plumb season after season. We excavate to assess the footing, replace or reinforce the post with concrete-set steel or pressure-treated timber, and realign the gate to proper swing geometry. For estate gates in River Oaks and Tanglewood, we often upgrade to deeper footings that resist soil movement.
Weld Repair
Cracked welds on ornamental iron or steel frames aren’t cosmetic issues - they’re structural failures that spread under cyclic loading. We grind out the compromised metal, prep the joint, and lay a fresh bead with equipment we bring to every job. Our technicians are trained welders, not workers who “can weld a little.” In Spring Branch and Oak Forest, we’ve repaired gates that other companies said needed full replacement, saving homeowners thousands.
Gate Realignment
A gate that doesn’t close squarely strains every component in the system. Realignment is precise work: we check post plumb, hinge pivot points, latch strike position, and ground clearance across the full swing arc. Sometimes the fix is a hinge adjustment; sometimes we need to reset the post or shave the bottom rail. We measure with a laser level and test the operation ten times before we call it done. Houston’s settling slabs and shifting soils make this one of our most common calls in older neighborhoods like Gate Repair - West University Place and Southside Place.
Lock Repair
Gate locks take abuse from weather, misalignment, and forced entry attempts. We service mechanical deadbolts, magnetic locks, electric strikes, and keypad-integrated latches. If the lock mechanism is serviceable, we rebuild it; if it’s compromised, we replace with a grade that matches your security needs. For properties in Memorial and Piney Point, we often integrate lock repair with access control updates so you’re not carrying three remotes and a key.
Rust Treatment
Houston’s Gulf Coast humidity creates rust faster than inland climates. Surface rust becomes scale rust, which becomes structural loss. We wire-brush or media-blast to bare metal, apply rust-inhibiting primer, and finish with a topcoat matched to your existing color. For wrought iron in Southampton and Boulevard Oaks, we also apply a wax-based protective coat that extends the cycle between treatments. Caught early, rust treatment adds years to a gate’s life. Ignored, it means eventual replacement.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Repair
We’ve serviced hundreds of LiftMaster gate operators across Houston, from residential swing-arm units in Braeswood Place to commercial slide gates in the Energy Corridor. We stock their replacement gears, circuit boards, and safety sensors, and our technicians are factory-trained on their diagnostic protocols. For FAAC systems, common in the estate properties of Hunters Creek and stable communities like Jacinto City, we carry the 740 and 422 control boards and understand the specific voltage requirements that trip up generalist repairmen.
BFT and Linear round out the European and domestic operators we see most often in Houston’s varied housing stock. BFT’s hydraulic swing gates need different care than Linear’s rack-and-pinion slide drives, and we maintain the tooling and software for both. Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule are equally represented in our service vans. Whether you have a 15-year-old FAAC or a new Ghost Controls solar unit, we can diagnose it, repair it, and guarantee it.
Signs You Need Gate Repair Right Now
- The gate sags or drags on the ground. This means hinges are failing, the frame is twisting, or the post is settling. Continued operation bends the frame further and can damage the operator’s drive mechanism. We see this most often after Houston’s spring rains saturate the soil.
- You hear grinding, squealing, or clicking from the motor. These sounds indicate mechanical wear, stripped gears, or a motor working against excess resistance. Running it to failure usually turns a $280 gear replacement into a $600 operator rebuild.
- The gate reverses before closing or stops mid-travel. Safety sensors may be misaligned, but this can also signal a failing control board or mechanical binding. In Houston’s summer heat, we find sensor lenses clouded with pollen and spider webs - and we also find boards that are simply dying after a decade of voltage spikes.
- Visible rust, cracks, or separation at welds. Ornamental iron gates in coastal-exposed areas like Clear Lake and League City develop rust faster, but even inland Houston properties show corrosion where paint has chipped. Cracked welds don’t heal themselves; they propagate until the joint fails.
- The remote or keypad works intermittently. This could be a dying battery, but it could also be a receiver failing, antenna damage, or interference from new construction. We test signal strength at the board and at the gate to isolate whether the problem is the access device or the operator’s radio.
Our Gate Repair Process - Step by Step
- 1
Call and schedule. A live person answers at (888) 799-8389, 24 hours a day. We ask about your gate type, the symptoms, and your location in Houston. Most appointments are set within 24 hours; emergency calls for stuck-open or stuck-closed gates get same-day priority.
- 2
Arrival and inspection. Our technician arrives in a marked van, uniformed and background-checked. We listen to what you’ve observed, then inspect the gate, posts, hinges, operator, and access controls. We use a multimeter to check voltage at the board, a laser level for alignment, and a load tester for battery-backed systems.
- 3
Upfront pricing. Before any work begins, you receive a written estimate with line-item pricing. No surprises on the bill. If we find additional issues during repair, we stop and explain before proceeding. You approve every dollar.
- 4
Repair and testing. We complete the repair with parts from our van inventory when possible. Afterward, we cycle the gate twenty times, test all safety features, verify remote and keypad function, and check manual release operation. We clean our work area before we leave.
- 5
Written guarantee and follow-up. You receive documentation of the 90-Day Done Right Promise, applicable to all labor and parts. We note any maintenance items to watch, and we’re available by phone if questions arise. Our office follows up within two weeks to confirm satisfaction.
How Much Does Gate Repair Cost in Houston?
A typical hinge repair or adjustment in Houston runs $180-$280. Post repair or replacement ranges from $350-$650 depending on depth, materials, and whether we need to relocate utilities. Weld repair on ornamental iron usually falls between $200-$400. Gate realignment starts around $150 for simple adjustments and can reach $450 if we need to reset a post. Lock repair runs $180-$320; rust treatment for a standard driveway gate is $250-$450 depending on surface area and finish matching.
Several factors move the price: the gate’s size and weight, material (wrought iron, aluminum, steel, wood), accessibility for our equipment, and whether the problem has caused secondary damage to the operator or frame. A gate that’s been dragging for six months often needs hinge repair and frame straightening and operator gear replacement.
The Best Gate Repair in Houston, TX starts with calling early, before a small problem becomes a system failure. Our free estimate includes a full inspection - not a quick glance and a guess. We also offer a $50 discount on any repair over $250, and a free second opinion if you have a written estimate from another company you’re unsure about.
Gate Repair Near Houston - Our Service Area
We repair gates across Houston and the surrounding communities with typical response times under 90 minutes for emergency calls in the central corridor. Our regular service area includes Houston, Jacinto City, Galena Park, Cloverleaf, Aldine, West University Place, Pasadena, South Houston, Bellaire, Channelview, Humble, and Deer Park. For estate properties in Memorial, Tanglewood, and River Oaks, we schedule dedicated time blocks to allow for the detailed work these installations require. Wherever you are in the Houston metro, we arrive when we say we will.
Serving Houston, TX - Our Local Coverage Area
We’re based in the Houston area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Repair in Houston
Gate repair is the professional restoration of a driveway or estate gate’s mechanical, structural, and electrical function. This includes fixing hinges, posts, welds, alignment, locks, and rust damage, plus diagnosing and repairing the motor operator and access controls. At Ironworks Gate Co., we handle the full scope from a squeaky hinge to a failed circuit board, always with the goal of fixing it right so you don’t think about it again.
Most gate repairs are completed in a single visit of two to four hours. We stock common hinges, hardware, and operator parts for nine major brands, so we rarely need to order components. Complex welding, custom fabrication, or post replacement may require a return visit. We’ll tell you before we start whether your job is a same-day fix or a multi-day project. Call (888) 799-8389 for a time estimate based on your specific gate.
Gate repair in Houston typically ranges from $180 for simple hinge or alignment work to $650 for post replacement or extensive welding. The average repair we perform falls between $250 and $400. Your exact price depends on the gate’s size, material, and what’s actually wrong - which is why we provide free, written, upfront estimates before any work begins. Ask about our $50 off repairs over $250 when you call.
Yes. We are trained and equipped to service LiftMaster gate operators, and we stock their most common replacement parts. We’ve repaired hundreds of LiftMaster units in Houston, from residential swing gates to commercial slide operators. Whether your issue is a failed control board, stripped gear, or safety sensor malfunction, we can diagnose and fix it on the first visit in most cases. Call (888) 799-8389 to schedule.
Yes. We answer the phone live 24 hours a day, 7 days a week, and we prioritize Emergency Gate Repair in Houston, TX for gates that are stuck open, stuck closed, or physically damaged. A gate that won’t close is a security concern; a gate that won’t open can trap vehicles. We aim for same-day response on emergencies anywhere in our Houston service area. Call (888) 799-8389 any time, day or night.
Every gate repair is protected by our written 90-Day Done Right Promise. If anything related to our repair fails or performs incorrectly within 90 days, we return and correct it at no charge. No paperwork to file, no argument about coverage. This applies to all labor and parts we install. For ongoing protection, ask about our $89 Seasonal Tune-Up, which catches wear before it becomes failure.
Clear a path to the gate for our technician and vehicle, and ensure we can access the operator’s electrical supply. If the gate is stuck closed, unlock any manual release so we can assess the mechanism. Note any recent changes in sound, speed, or remote behavior to tell our technician. You don’t need to diagnose the problem - that’s our job. Call (888) 799-8389 to set your appointment; estimates are free and carry no obligation.
Schedule Your Gate Repair Service in Houston Today
Call (888) 799-8389 now and speak with a live person, 24 hours a day. We’ll schedule your free estimate, apply any standing offers you qualify for, and get your gate working the way it should. Done right - and backed in writing.
Written by Dale Briscoe, Owner at Ironworks Gate Co., serving Houston since 1984.