Linear Gate Repair in Houston: What to Know First
We provide independent Linear gate repair in Houston, and most calls are completed same-day or next-day with upfront pricing settled before we start. Typical Linear repairs run $195-$485 depending on whether we’re addressing a control board issue, actuator failure, or structural gate problem. We will tell you what it needs, not what sells.
This page is for Houston homeowners who already know they have a Linear operator or access system and need it fixed right the first time. Maybe your swing gate stopped mid-cycle during last week’s storm, or your slide gate’s actuator has been grinding for a month. We’re Ironworks Gate Co. of Houston, and we’ve been repairing Linear equipment across Harris County since 1984. Call (888) 799-8389 anytime - a live person answers, 24 hours a day.
How Linear Products Fail - and How We Fix Them
- Linear Pro Access control boards failing after power surges. Houston’s summer thunderstorms and unreliable grid voltage in older neighborhoods like Spring Branch and the Heights send spikes through Pro Access 3100 and 5100 series boards. We see burnt relay contacts and corrupted logic modules. Our fix: test the full 24V circuit, replace the board with a surge-protected unit, and install a separate surge suppressor at the transformer. We keep Pro Access boards on the truck so you’re not waiting a week.
- Linear ACT-31 and ACT-34 actuators seizing in high humidity. These medium-duty swing-gate operators use a brushed DC motor with an internal gearbox that traps moisture. After five to seven Houston summers, the grease turns to paste and the worm gear binds. We disassemble the actuator, clean the housing with electrical contact cleaner, relubricate with high-temp synthetic grease rated for 95% humidity, and replace the limit switch if it’s corroded. A new actuator runs $380-$520; rebuilds save about 40% when the motor windings test clean.
- Linear LS100 slide gate operators throwing “overload” faults on cold mornings. The LS100’s thermal overload protector gets sensitive as the drive belt ages, and Houston’s occasional January freeze combined with a dry-rotted belt causes nuisance trips. We check belt tension and wear, inspect the nylon drive gear for cracking, and recalibrate the current-sense potentiometer. If the gear is stripped, we source the steel replacement gear instead of the factory nylon - same fit, lasts longer in Texas heat.
- Linear AM-RPR radio receivers losing range after tower upgrades. Houston’s ongoing 5G expansion has crowded the 310 MHz band that older Linear AM receivers use. Your remote works from the kitchen but not the driveway. We diagnose with a spectrum analyzer on-site, then either retune the receiver’s crystal or upgrade you to a Multi-Code or MegaCode 318 MHz system that Linear designed to avoid the new interference. We program all remotes before we leave.
- Linear gate hinges and posts failing from Gulf Coast salt air. This isn’t the operator’s fault, but it kills the gate that the operator is trying to move. In coastal Houston neighborhoods like Clear Lake and Seabrook, we see 316 stainless hinge pins pitting through after eight years, and steel posts rusting at the concrete line. We cut out the damaged section, weld in schedule-40 replacement steel with marine-grade primer, and realign the gate so the Linear actuator isn’t fighting a sagging frame.
Our Linear Gate Repair Process
- 1
You call, we answer. A live person at Ironworks Gate Co. picks up 24/7. We ask your Linear model if you know it, the symptoms, and your neighborhood - Memorial Village gates fail differently than Pearland gates.
- 2
On-site diagnosis with Linear-specific tools. Our tech arrives with the Linear service manual loaded on a tablet, a 24V power supply for bench-testing boards, and a stock of common Linear parts. We test the operator, the gate mechanics, and the electrical supply separately.
- 3
Upfront pricing, your choice on parts. We quote OEM Linear parts and quality aftermarket alternatives where they exist. For control boards, we recommend OEM - the warranty is clean and the firmware is current. For mechanical items like gears and belts, the aftermarket options we use meet or exceed Linear’s spec and cost less.
- 4
The repair, documented. We photograph before and after, torque every fastener to spec, and run the full open-close cycle at least ten times under load. If we replaced an actuator, we set the limit switches with a digital angle gauge, not by eye.
- 5
Written 90-Day Done Right Promise. You get a printed invoice with our guarantee: if anything related to our repair fails within 90 days, we come back and make it right. No paperwork to find, no argument, no charge.
- 6
Cleanup and gate care notes. We leave the work area cleaner than we found it, and we tell you what to watch for - how often to grease the hinges, when to call about a new noise. Most Linear operators need a seasonal check in Houston’s climate.
What Linear Gate Repair Costs in Houston
| Repair Scenario | Typical Range | What Moves the Price |
|---|---|---|
| Linear control board replacement (Pro Access series) | $285-$445 | Board generation, surge suppressor add-on, whether the transformer also took damage |
| Linear actuator rebuild or replacement (ACT series) | $195-$485 | Rebuild vs. new, motor winding condition, limit switch corrosion |
| LS100 slide operator belt/gear service | $165-$320 | Nylon vs. steel replacement gear, belt brand, drive sprocket wear |
| Radio receiver reprogram or upgrade | $125-$275 | Receiver age, number of remotes, wall button integration |
| Hinge/post weld repair with realignment | $240-$580 | Post depth, gate material (aluminum vs. steel), access for welding rig |
These are Houston market ranges based on our 2024-2025 jobs. Your exact quote comes after we see the gate. We offer $50 off any repair over $250, a free second opinion on any written estimate you’ve already received, and an $89 seasonal tune-up that catches most of these problems before they strand you. Seniors and veterans save 5% on every job, always. Call (888) 799-8389 for a free estimate - we’ll give you the number before we start, and that’s the number on the invoice.
Why Houston Homeowners Call Ironworks Gate Co. of Houston for Linear Work
We’re not the cheapest call in Houston. We’re the call you make once. Our 90-Day Done Right Promise - the Keystone Standard - means we come back if anything’s not right, no paperwork, no arguing. Dale Briscoe started this company in 1984 after learning welding in his grandfather’s shop in Acres Homes and electrical systems at San Jacinto College. That background matters when your Linear operator is fine but the gate frame is twisted from a delivery truck.
We’re trained and equipped on nine automation brands including Linear, LiftMaster, Mighty Mule, Ghost Controls, and DoorKing. If your Linear system is obsolete or parts are back-ordered, we can propose a compatible alternative and install it without changing your gate hardware. Most jobs finish in one visit because our trucks carry Linear boards, actuators, gears, and remotes. A live person answers the phone 24 hours a day. We will be there when we say.
FAQs
No, as an independent Linear service provider we use warranty-safe practices, but Linear’s original equipment warranty expires after its stated period regardless of who services it. If your operator is still under Linear’s factory warranty, we use OEM parts and document the repair so your coverage stays intact. If the warranty has expired, we show you both OEM and quality aftermarket options so you choose. Call (888) 799-8389 and we’ll check your serial number against Linear’s warranty database.
We stock the most common Linear control boards, actuators, and radio receivers on our service trucks, so most repairs happen same-day. For obsolete Linear models or specialized items, we source through our Houston distributor network with typical lead times of two to four business days. We never leave you without a working gate if we can help it - we’ll explain temporary access options while we wait. Call (888) 799-8389 to check our current Linear stock for your model.
Repair is usually the better value if your Linear operator is under ten years old and the motor windings test good. A $320 actuator rebuild on a seven-year-old Pro Access system beats a $1,400-$2,200 full replacement. We recommend replacement when the control board is failed and obsolete, the operator has multiple prior repairs, or the gate itself has changed weight or usage and the original Linear unit is undersized. We’ll give you both numbers and let you decide. Estimates are free - call (888) 799-8389.
Yes, for most Linear gate repairs in Houston we offer same-day or next-day service, especially for swing-gate actuator failures and control board replacements that we stock. Emergency calls get priority scheduling. A live person answers 24 hours a day, and we’ll give you a two-hour arrival window. Call (888) 799-8389 now - we’ll tell you exactly when we can be there.
Yes. We’re certified on nine automation brands: Linear, LiftMaster, FAAC, BFT, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your Linear operator is beyond repair or parts are no longer manufactured, we’ll recommend the best-fit replacement from our lineup based on your gate type, usage, and budget. We handle the full removal, installation, and disposal. Call (888) 799-8389 for a free replacement estimate.
Ready to get your Linear gate working right? Call Ironworks Gate Co. of Houston at (888) 799-8389 for a free estimate. A live person will answer, we’ll give you an upfront price before any work begins, and every repair is backed by our written 90-Day Done Right Promise. We’ve been fixing gates in Houston since 1984, and we plan to be here when you need us again.
Written by Dale Briscoe, Owner, Ironworks Gate Co. of Houston at Ironworks Gate Co. of Houston, serving Houston and nearby areas.